Fitment
For Acura RSX & Type-S 2002-2006
For Honda Integra DC5  2001-2006 

Note
All modifications must be installed by licensed mechanics and in compliance with your local modification regulations.
Please ensure all components are tightened with correct torque specifications (which can be found in the vehicle service manual)before and after installation. Any loose nuts, bolts, or locks will cause noise. Do check and tighten before serious problems happen. 
Impact wrench is prohibited during the installation, it will loosen or damage the product.
Examine the clearance between tires and suspension. ( The minimum clearance should be 4mm, otherwise, you need to add wheel spacers. Caution: It is not sufficient with torsion beam trailing arm axles)
We suggest regular maintenance for the coil-over, spray with some WD40 every 3-4 months will keep it smooth and clean, which helps to extend the lifetime.

Standard Technical Specifications
Front top mount：Pillow ball
Rear top mount：Standard rubber
Damping adjustable：Available, 24 levels of rebound damping force
Camber adjustable：Not available
Height adjustable：Yes, lowering 25-75mm depending on the vehicle models
Spring Rate Front：8 kg/mm (448 lbs/in)
Spring Rate Rear：6 kg/mm (336 lbs/in)
Spring length Front：180 mm
Spring length Rear：140 mm
Spring Preload advised：7-10 mm
Front spring inner diameter：70.5 mm
Rear spring inner diameter：62 mm

Feature
Lowered height adjustment from 25-75mm which allows a lower center of gravity and also adds a more aggressive stance 
Adjustable pre-load spring tension to reduce the shaking motion to a certain extent
24 levels adjustable damper -- This allows you the ability to perfectly dial in your coil-overs system. For nice comfortable driving, set damping to full soft. For more spirited driving, set it to 16 clicks. For occasional track days, set it to full stiff.
CNC machined Aluminum  top mounts and lockers-- - excellent strength, and save weight
Heavy Duty Steel Lower Mounts--- Highly Durable & Reliable
Upgraded spring --- more than 600,000 times continuously test to assure its high tensile strength.
All inserts come with fitted long rubber boots--- To protect the damper better and be durable.
With a better-damping setting, you will get better performance and comfort at the same time.
Twin-Tube structure ---provides excellent handling & control characteristics for most driving conditions
Anti-corrosion Finish - Anodized Aluminum And Powder Coated Carbon Steel Parts
Test for the best---Every part was tested on our professional machine before being assembled and tested by our professional racers on the road.
Clean room assembled---maintain a higher level of accuracy and reliability.
Upgraded damper oil---make damping more stable and smooth in a wide temperature range.