Fitment
For Nissan S13 240SX 1989-1994 USA 
For Nissan S13 200SX 1989-1993 Europe 
For Nissan S13 Silvia 1988-1993 Japan
For Nissan S13 180SX 1989-1999 Japan 
For Nissan S13 Sileighty 1998 Japan 

Specification 
Front top mount: Pillow ball with camber plate 
Rear top mount: Standard rubber 
Damping adjustable: Not available 
Camber adjustable: Available, front only 
Height adjustable: Yes, lowering 25-75mm depending on the vehicle models 
Spring Rate Front: 8 kg/mm(448lbs/in) 
Spring Rate Rear: 7 kg/mm(392lbs/in) 
Front spring inner diameter: 70.5 mm 
Rear spring inner diameter: 70.5 mm 
Spring length Front: 180 mm 
Spring length Rear: 220 mm 
Spring Preload advised: 7-10 mm 
Color: Red 

Package included 
2x Front coil-overs 
2x Rear coil-overs 
2x C spanners 

Notice 
All modifications must be installed by licensed mechanics and in compliance with your local modification regulations.
Please ensure all components are tightened with correct torque specifications (which can be found in the vehicle service manual)before and after installation. Any loose nuts, bolts, or locks will cause noise. Do check and tighten before serious problems happen.
Impact wrench is prohibited during the installation, it will loosen or damage the product.
Examine the clearance between tires and suspension. ( The minimum clearance should be 4mm, otherwise, you need to add wheel spacers. Caution: It is not sufficient with torsion beam trailing arm axles)
We suggest regular maintenance for the coil-over, spray with some WD40 every 3-5 months will keep it smooth and clean, which helps to extend the lifetime.